A Collection of Papers Hydrogen In Heavy Wall Saw-Joints Of 2¼Cr-1mo Steel After Different Dehydrogenation Heat Treatments S. Dittrich, G. Grote, A. Heuser Electron Beam Welding Of Chromium-Molybdenum Steels For Petrochemical Applications Ph. Bourges, A. Cheviet Advanced Methods For Heavy Reactor Fabrication Aimed To Minimize Hydrogen Content And Welding Flaws - Experience On Cr-Mo Vanadium Steels Silvano Bertolini Restoration Of Damaged 2¼ Cr - 1 Mo Vessel J.S. Lee, E. Upitis, D.G. Miller, C.D. Lundin Specifying 1¼Cr-½Mo Steels For Freedom From Cracking In Hydroprocessing Service C. Lundin, K. Khan, P. Liu, C. Qiao, G. Zhou, M. Prager Repair and Fabrication Practices For 1¼Cr-½Mo Steel C. Lundin, M. Prager New Applications Of Mass Spectrometry To In Situ Measurement Of Hydrogen In Heat Affected Zones L. Coudreuse, J. Charles, F. Faure Diffusible Hydrogen Content In Submerged Arc Welding (Saw); A New Method For Hydrogen Determination C. Casciaro, P. Marinelli, A. Solina, R. Valentini ISSN: 0043-2326 ISBN: 1-58145- 532-1 Library of Congress Catalog Card Number: 85-647116 Number of Pages: 91 more detail...
Failure of Welds at Elevated Temperatures by G.R. Stevick, March 1994 (39 pp) more detail...
Effect of Heat Treatment on the Elevated Temperature Properties of a 2 ?Cr-1Mo Submerged Arc Weldment, by C.D. Lundin and K.K. Khan. September 1995 (45 pp) more detail...
Reports on Heat Treatment of Steels Used in Boiler and Pressure Vessel Applications: (1) Carbon Migration in Cr-Mo Weldments Effect on Metallurgical Structure and Mechanical Properties, by C.D. Lundin, K.K. Khan and D. Yang and (2) ASME Post-Weld Heat Treating Practices: An Interpretive Report, by C.E. Spaeder, Jr. and W.D. Doty, December 1995 (65 pp) more detail...
Fundamental Studies of the Metallurgical Causes and Mitigation of Reheat Cracking in 1?Cr-?Mo and 2?Cr-1Mo Steels, by C.D. Lundin and K.K. Khan, February 1996 (117 pp) more detail...
An Experimental Study of Causes and Repair of Cracking of 1?Cr-?Mo Steel Equipment, by C.D. Lundin, P. Liu, C.Y.P. Qiao, G. Zhou, K.K. Khan and M. Prager, May 1996 (215 pp) more detail...
Challenges and Solutions in Repair Welding for Power and Processing Plants ? Proceedings of a Workshop, June 1996 (125 pp) more detail...
Creep Crack Growth Behavior in Weld Metal/Base Metal/Fusion Zone Regions in Chromium Molybdenum Steels, by R.H. Norris and A. Saxena ? November 1996 (61 pp) more detail...
Use of Low Carbon 1-1/4 Cr-Mo Weld Metal for Fabrication of Cr-Mo Components, by C.D. Lundin, P. Liu, G. Zhou and K. Kahn - February 1999 (99 pp) more detail...
A Literature Review on Characteristics of High Temperature Ferritic Cr-Mo Steels and Weldments by Carl D. Lundin, Peng Liu, Yan Cui - August 2000. Library of Congress Card Catalog: 85-647116 (36 pages) more detail...
